You can reactivate one or more packs in your hospital.


Note: You cannot reactivate destroyed packs.


This article collects all the possible "Reactivate" actions available in the Hospital Pharmacies FMD application:

  • Single scan
  • Multiple scans
  • Bulk scan


Note: The procedures described below take the use case when the operator scans the items by using the camera of the mobile device. For mobile devices with built-in scanners, the scanning-related GUI buttons may not be displayed and the user needs to press the physical button on the device to scan.


List of Procedures


Scanning a Pack

Use the Scan pack option to scan one pack.


Before You Begin


Make sure the administrator has assigned you as an operator to the Hospital Pharmacies FMD application, assigned you to a hospital, and authorized you to reactivate packs.


Procedure


1. Open the Hospital Pharmacies FMD application in Movilitas Mobile.


2. Select Reactivate. The application displays the scanning options.


3. Select Scan pack. 


4. Tap SCAN PACK and scan the 2D code on the pack. The application displays the status, the details of the pack, and the REACTIVATE PACK button.


5. Tap REACTIVATE PACK. The status of the pack is set to Active.



Back to the list of procedures


Scanning Multiple Packs

Use the Scan multiple packs option to scan multiple packs. You use this option to scan up to 30 packs.


Before You Begin


Make sure the administrator has assigned you as an operator to the Hospital Pharmacies FMD application, assigned you to a hospital, and authorized you to reactivate packs.


Procedure


1. Open the Hospital Pharmacies FMD application in Movilitas Mobile.


2. Select Reactivate. 


3. Select Scan multiple packs.


4. Tap SCAN MULTIPLE PACKS button and scan the 2D code on the pack. The application displays the scanned pack in the list with its status.


Slide the item to the left for further options:

  • PREVIEW
  • REMOVE


5. Select CONTINUE SCAN and scan further items. The application displays the REACTIVATE PACKS button.


6. Select REACTIVATE PACKS.


The application displays a summary of the action completed for the scanned items. You can slide the item to the left to select PREVIEW and check the status.


Back to the list of procedures


Scanning Bulk Packs

Use the Scan bulk packs option to scan up to 30 packs and create a bulk request to complete the same action for them.


If you are an administrator, you can follow up on the results of these bulk actions in the mobile application.


Before You Begin


Make sure the administrator has assigned you as an operator to the Hospital Pharmacies FMD application, assigned you to a hospital, and authorized you to reactivate packs.


Procedure


1. Open the Hospital Pharmacies FMD application in Movilitas Mobile.


2. Select Reactivate. The application displays the scanning options.


3. Select Scan bulk packs.


4. Tap SCAN MULTIPLE PACKS button and scan the 2D code on the pack. The application displays the scanned pack in the list with its status.


Slide the item to the left for further options:

  • PREVIEW
  • REMOVE


5. Select CONTINUE SCAN and scan further items. The application displays the REACTIVATE PACKS button.


6. Select REACTIVATE PACKS. The application displays a status message.


Back to the list of procedures