You can export one or more packs in your warehouse.


This article collects all the possible "Export" actions available in the Wholesaler FMD application:

  • Single scan
  • Multiple scans
  • Bulk scan
  • Scan for order


The available actions depend on the application setup. For more information, see Movilitas Mobile for Wholesaler FMD - Overview.


Note: The procedures described below take the use case when the operator scans the items by using the camera of the mobile device.

  • For mobile devices with built-in scanners, the GUI buttons related to scanning may not be displayed and you need to press the physical button on the device to scan.
  • For devices with external (table) scanners, you can point the scanner to the barcode to scan and you can ignore the GUI buttons on the screen related to scanning.


List of Procedures


Scanning a Pack

Use the Scan pack option to scan one pack.


Before You Begin


Make sure the administrator has assigned you as an operator to the Wholesaler FMD application, assigned you to a warehouse, and authorized you to export packs.


Procedure


1. Open the Wholesaler FMD application in Movilitas Mobile.

2. Select the mode of operation:

  • Wholesaler
  • 3PL


Note: This step is only applicable when Wholesaler and 3PL mode is set in the web application.

 

3. When 3PL mode is selected, scan MAH (3PL) client or select the client from the drop-down, then tap CONTINUE.


4. Select Export. The application displays the scanning options.


5. Select Scan pack. 


6. Tap SCAN PACK and scan the 2D code on the pack. The application displays the status, the details of the pack, and the EXPORT PACK button.


7. Tap EXPORT PACK. The status of the pack is set to Exported or Processed, depending on the setup.



Back to the list of procedures


Scanning Multiple Packs

Use the Scan multiple packs option to scan multiple packs. You use this option to scan up to 30 packs.


Before You Begin


Make sure the administrator has assigned you as an operator to the Wholesaler FMD application, assigned you to a warehouse, and authorized you to export packs.


Procedure


1. Open the Wholesaler FMD application in Movilitas Mobile.

2. Select the mode of operation:

  • Wholesaler
  • 3PL


Note: This step is only applicable when Wholesaler and 3PL mode is set in the web application.

 

3. When 3PL mode is selected, scan MAH (3PL) client or select the client from the drop-down, then tap CONTINUE.


4. Select Export. Depending on the setup, the application displays the scanning options or automatically directs you to scan multiple packs.


If you have multiple options to select, select Scan multiple packs.


5. Tap SCAN MULTIPLE PACKS button and scan the 2D code on the pack. The application displays the scanned pack in the list and, depending on the setup, the status of the pack.


Slide the item to the left for further options:

  • PREVIEW (not available in every mode)
  • REMOVE


6. Select CONTINUE SCAN and scan further items. The application displays the EXPORT PACKS button.


7. Select EXPORT PACKS and confirm the action.


Depending on the setup:

  • The application displays a summary of the action completed for the scanned items:
    • There is a separate list for the successful requests and the failed requests, respectively. In this way, you can quickly detect if there are failed requests.
    • You can slide the item to the left to select PREVIEW and check the status.
    • A user with the administrator role can resend the failed requests to the NMVS by using the RETRY FAILED PACKS button.
  • The request is sent to the MAH to complete the selected activity on the packs. All requests are listed in the List of transactions.



Back to the list of procedures



Scanning Bulk Packs

Use the Scan bulk packs option to scan multiple packs and create a bulk request. 


You use this option to scan multiple packs and create a request to complete the same action for them later. You can follow up on the results of these bulk actions in the mobile application or the administrator can have a look at them in the web application.


Before You Begin


Make sure the administrator has assigned you as an operator to the Wholesaler FMD application, assigned you to a warehouse, and authorized you to export packs.


Procedure


1. Open the Wholesaler FMD application in Movilitas Mobile.

2. Select the mode of operation:

  • Wholesaler
  • 3PL


Note: This step is only applicable when Wholesaler and 3PL mode is set in the web application.

 

3. When 3PL mode is selected, scan MAH (3PL) client or select the client from the drop-down, then tap CONTINUE.


4. Select Export. The application displays the scanning options.


5. Select Scan bulk packs.


6. Tap SCAN MULTIPLE PACKS button and scan the 2D code on the pack. The application displays the scanned pack in the list with its status.


Slide the item to the left for further options:

  • PREVIEW
  • REMOVE


7. Select CONTINUE SCAN and scan further items. The application displays the EXPORT PACKS button.


8. Select EXPORT PACKS and confirm the action.


When reporting to NMVS, the application displays the received NMVS transaction ID. You can track the progress of the transaction in the web application under the Bulk actions tab or by selecting the Bulk Actions option in the mobile application.


Back to the list of procedures


Scanning for Order

Use an existing order or create a new order to scan multiple packs and group them.


Before You Begin


Make sure the administrator has assigned you as an operator to the Wholesaler FMD application, assigned you to a warehouse, and authorized you to export packs.


Procedure


1. Open the Wholesaler FMD application in Movilitas Mobile.

2. Select the Wholesaler mode.


Note: This step is only applicable when Wholesaler and 3PL mode is set in the web application.


3. Select Export. The application displays the scanning options.


4. Select Scan for order.


5. Provide an order ID in one of the following ways:

  • Select SCAN ORDER ID and scan the order ID.
  • Enter the order ID manually and select GET ORDER.


The application checks if the order is existing in the system and displays a dialog to continue the action. If the order is not existing in the system, you also need to confirm the creation.


6. If you create the order in the mobile application, enter the number of items to be scanned and tap CREATE ORDER.


7. Select SCAN PACK and scan the 2D code on the pack. The application displays the scanned pack in the list and refreshes the status for the number of items.

  • You can slide the item to the left for further options (PREVIEW or REMOVE).
  • You can pause the order any time by selecting PAUSE ORDER and you can continue scanning for it later.
  • You can update the order by changing the number of items and selecting UPDATE ORDER.


8. Select CONTINUE SCAN to scan all the items for the order. Once you scan the number of items specified in the order, the application displays the SUBMIT ORDER button.


9. Select SUBMIT ORDER to complete the order.


The application displays a system message and the order gets an NMVS transaction ID. You can track the progress of the transaction in the web application under the Bulk actions tab or by selecting the Bulk Actions option in the mobile application.


Back to the list of procedures