You can reactivate one or more packs in your warehouse.


Note: You cannot reactivate destroyed and stolen packs.


This article collects all the possible "Reactivate" actions available in the Wholesaler FMD application:

  • Single scan
  • Multiple scans
  • Bulk scan


The available actions depend on the application setup. For more information, see Movilitas Desktop for Wholesaler FMD - Overview.


List of Procedures


Scanning a Pack

Use the SCAN PACK option to scan one pack and reactivate it.


Before You Begin


Make sure the administrator has assigned you as an operator to the Wholesaler FMD application, assigned you to a warehouse, and authorized you to reactivate packs.


Procedure


1. Open the Wholesaler FMD application in Movilitas Desktop.

2. Select the mode of operation:

  • Wholesaler
  • 3PL


Note: This step is only applicable when Wholesaler and 3PL mode is set in the web application.

 

3. When 3PL mode is selected, scan MAH (3PL) customer or select the customer from the drop-down, then choose CONTINUE.


4. Select Reactivate. The application displays the scanning options.


5. Select SCAN PACK. 


6. Scan the 2D code on the pack. The application displays the status, the details of the pack, and the REACTIVATE PACK button.


7. Choose REACTIVATE PACK. The status of the pack is set to Active.


Back to the list of procedures


Scanning Multiple Packs

Use the SCAN MULTIPLE PACKS option to scan multiple packs and reactivate them. You use this option to scan up to 30 packs. 


Before You Begin


Make sure the administrator has assigned you as an operator to the Wholesaler FMD application, assigned you to a warehouse, and authorized you to reactivate packs.


Procedure


1. Open the Wholesaler FMD application in Movilitas Desktop.

2. Select the mode of operation:

  • Wholesaler
  • 3PL


Note: This step is only applicable when Wholesaler and 3PL mode is set in the web application.

 

3. When 3PL mode is selected, scan MAH (3PL) customer or select the customer from the drop-down, then choose CONTINUE.


4. Select Reactivate. Depending on the setup, the application displays the scanning options or automatically directs you to scan multiple packs.


If you have multiple options to select, select SCAN MULTIPLE PACKS.


5. Scan the 2D code on the pack. The application displays the scanned pack in the list and, depending on the setup, the status of the pack.


You can remove an item from the list by selecting Remove.


6. In 3PL mode, when reporting to the MAH, the application displays the Status drop-down. Select the current status of the packs in the Status drop-down.


Note: You can select only one status and the setting is applicable to all the scanned items.


7. Scan further items.


8. Choose REACTIVATE PACKS and confirm the action.


Depending on the setup:

  • The application displays a summary of the action completed for the scanned items.
  • The request is sent to the MAH to complete the selected activity on the packs. All requests are listed in the List of transactions.


Back to the list of procedures


Scanning Bulk Packs

Use the SCAN BULK PACKS option to scan multiple packs and create a bulk request. 


You use this option to scan multiple packs and create a request to complete the same action for them later. You can follow up on the results of these bulk actions in the desktop application or the administrator can have a look at them in the web application.


Before You Begin


Make sure the administrator has assigned you as an operator to the Wholesaler FMD application, assigned you to a warehouse, and authorized you to reactivate packs.


Procedure


1. Open the Wholesaler FMD application in Movilitas Desktop.

2. Select the mode of operation:

  • Wholesaler
  • 3PL


Note: This step is only applicable when Wholesaler and 3PL mode is set in the web application.

 

3. When 3PL mode is selected, scan MAH (3PL) customer or select the customer from the drop-down, then choose CONTINUE.


4. Select Reactivate. The application displays the scanning options.


5. Select SCAN BULK PACKS.


6. Scan the 2D code on the pack. The application displays the scanned pack in the list with its status.


You can remove an item from the list by selecting Remove.


7. Scan further items. The application activates the REACTIVATE PACKS button.


8. Choose REACTIVATE PACKS and confirm the action. The application displays a summary of the action completed for the scanned items.


Back to the list of procedures